The 10 Best Hp Pc Offers in UK - September 2025

When your HP PC won't turn on, it can be frustrating and cause panic. However, before calling for technical support, there are a few things you can do to troubleshoot the issue.

First, check that your PC is properly connected to a power source. Make sure the power cable is properly plugged into the outlet and the back of your PC. If it is, check that the outlet is functioning properly by plugging in a different device or using a voltage tester. Also, make sure that any surge protectors or UPS (uninterruptible power supply) units are functioning properly.

If you have determined that the issue is not with the power source, the next step is to check the hardware. If your PC has a detachable battery, remove it and plug in the power cable. If the PC turns on, the battery may need to be replaced. Another possibility is that your computer's memory (RAM) may be loose or malfunctioning. Check that the memory modules are correctly seated in their slots. If this is not the culprit, try removing one memory module at a time and see if your PC turns on.

If the issue still persists, you may need to perform a hard reset. First, disconnect all peripheral devices and unplug the power cable from the PC. Then, hold down the power button on your PC for 15-20 seconds. This will discharge any residual power from your PC and may allow it to turn on normally. After that, try plugging in the power cable and turning the PC on again.

Finally, if all else fails, it may be a software issue. Try booting your PC in Safe Mode by pressing F8 during startup. This will limit the programs and drivers that are loaded, making it easier to troubleshoot any software-related issues. If you can boot your PC in Safe Mode, you can try updating drivers, running a virus scan, or performing a system restore.

In conclusion, when your HP PC won't turn on, it can be a stressful experience. However, by checking the power source, hardware, performing a hard reset, and booting in Safe Mode, you can troubleshoot and resolve many issues on your own. If you are still having problems, don't hesitate to contact technical support for further assistance.

If you feel like your HP PC is running slow or you're running out of storage space, upgrading its RAM or hard drive is a great way to boost its performance. Before you start, make sure your PC can be upgraded. Some HP models have limited upgradability, so it's best to check with your device's manual first.

If your HP PC is upgradable, upgrading the RAM is relatively easy. RAM modules can be purchased online or at a computer store. To upgrade, make sure your PC is turned off and unplugged from the power supply. Open the case and locate the RAM slots. Insert the new RAM sticks, making sure they're firmly in place before closing the case.

Upgrading your hard drive can also increase your device's storage capacity and boost its performance. However, this process can be more difficult than upgrading the RAM, and it may require additional software. To upgrade, you need to back up your current data, remove the old hard drive, install the new one, and reinstall your operating system and applications.

If you're not comfortable upgrading your HP PC yourself, you can take it to a computer repair shop or ask a professional to do it for you. Just be aware that this can be expensive, and it's important to find a reputable service provider to avoid any mishaps.

Finally, it's worth noting that upgrading your HP PC may void its warranty, so be sure to check with the manufacturer before making any changes to your device. Despite that, upgrading your RAM or hard drive can help keep your device running smoothly and extend its lifespan. So, if you feel like your PC could use a boost, it's worth considering an upgrade.

Connecting a second monitor to your HP PC is a great way to increase your productivity, multitask and expand your display area. Depending on the hardware of your computer, you can connect your second monitor through various ports such as VGA, HDMI, DisplayPort or DVI. In this article, we will explain how to connect a second monitor to your HP PC and provide some troubleshooting tips.

Before connecting a second monitor to your HP PC, make sure you have the necessary cables and adapters. If your HP PC has multiple video ports, you can connect one monitor to each port. Otherwise, you can use a video splitter to transmit the same signal to multiple monitors. Once you have the necessary equipment, follow these steps:

1. Turn off both your HP PC and the second monitor you want to connect.

2. Connect the monitor to your HP PC using the appropriate cable and ports. If your monitor has a VGA port, use a VGA cable to connect it to your computer's VGA port. If your monitor has an HDMI port, use an HDMI cable to connect it to your computer's HDMI port.

3. Turn on your HP PC. It should automatically detect the new monitor and activate it. If your computer does not detect the second monitor, go to the Display settings in your Control Panel and click on "Detect".

4. Once both monitors are detected, you can adjust the display settings to your preference, such as changing the resolution, orientation, or extending your desktop. Go to the Display settings in your Control Panel and select "Extend desktop". This will allow you to move windows and programs between the two monitors.

5. If the second monitor does not display the correct image or resolution, you may need to update your graphics driver or adjust the display settings. Check your computer's manufacturer website for driver updates or consult the user manual for troubleshooting tips.

In conclusion, connecting a second monitor to your HP PC is a straightforward process that can significantly enhance your work and entertainment experience. With the appropriate equipment and correct settings, you can extend your display, improve your multitasking, and work more efficiently. If you encounter any issues, ensure you have the latest driver updates and consult user manuals or customer support for assistance.

When it comes to choosing an antivirus software for your HP PC, there are a plethora of options available in the market. However, not all of them are created equal. Some of them are better than others in terms of protection, performance, and ease of use. To help you make an informed decision, we have compiled a list of the best antivirus software for HP PCs.

First on the list is Norton 360 Deluxe. This antivirus software is a comprehensive security solution that offers protection against various types of malware, including viruses, spyware, ransomware, and more. It also includes features like a firewall, password manager, and parental controls. Norton 360 Deluxe is easy to use and offers excellent protection without slowing down your system.

Another great option is Bitdefender Total Security. This antivirus software has consistently ranked high in independent AV tests for its malware detection and protection capabilities. It offers a range of features such as anti-phishing, anti-fraud, and anti-spam protection, as well as a VPN and a password manager. Bitdefender Total Security is user-friendly and requires minimal system resources.

McAfee Total Protection is also worth considering. It provides protection against viruses, malware, spyware, and more. Additionally, it boasts features like parental controls, anti-spam, and a firewall. McAfee Total Protection's interface is intuitive and easy to use, and its performance impact is minimal.

If you're looking for a free antivirus software, Avast Free Antivirus is a good option. It offers basic protection against malware, and features like anti-phishing, Wi-Fi inspector, and password manager. Avast Free Antivirus is lightweight and doesn't slow down your system. However, it does include ads and prompts to upgrade to the premium version.

Lastly, Windows Defender, which is built into Windows 10, is a decent option for basic protection. It offers real-time protection against viruses, malware, and other threats, and is regularly updated to stay ahead of the latest threats. While it may not be as feature-rich as other antivirus software, it's a reliable option and doesn't require any additional downloads or installations.

In conclusion, when it comes to choosing an antivirus software for your HP PC, there are several options available. It's important to choose one that provides comprehensive protection against various types of malware, has minimal system impact, and is user-friendly. Some of the best options include Norton 360 Deluxe, Bitdefender Total Security, McAfee Total Protection, Avast Free Antivirus, and Windows Defender. Whichever software you choose, always keep it updated to ensure maximum protection for your system.

Resetting your HP PC to its factory settings is an effective way to get rid of all the data and files and start anew. Whether you want to sell your computer or have to troubleshoot issues, restoring it to its original state can come in handy. In this article, we will take you through step-by-step instructions on how to reset your HP PC to its factory settings.

First and foremost, it is important to backup all your important data before restoring the computer to its factory default settings. You can choose an external hard drive or cloud-based services like Google Drive or Dropbox to keep your files safe. Once you have backed up your data, shut down your computer and disconnect all the peripherals.

Next, turn on your HP PC and press the "F11" key repeatedly until the "Choose an Option" screen appears. You can also access this screen by pressing the "Esc" key, tapping "F11," and selecting "Troubleshoot" followed by "Reset this PC" from there.

After selecting the "Reset this PC" option, you will be asked to choose between two options, namely "Keep my files" and "Remove everything." If you select "Keep my files," your PC will be restored to its default settings while keeping all your personal files and installed apps intact. However, if you select "Remove everything," your hard drive will be erased completely. Choose the option that suits your needs.

Once you have made your selection, your computer will ask you to confirm your choice and give a warning that all your data will be lost. If you are sure about resetting your HP PC to its factory settings, click "Reset." The computer will then proceed to restore itself to its default state.

Finally, after the reset process is complete, your HP PC will restart itself and ask you to choose your desired language and input method. Follow the on-screen instructions to set up your computer and log in. You can now start using your computer as a new device with all the default settings.

In conclusion, resetting your HP PC to its factory settings can help you get rid of unwanted files and start fresh. Keep in mind to backup all your important data and select the appropriate option before resetting your computer. Follow the above steps carefully, and you should be able to reset your HP PC without any problems.

When you encounter a black screen issue on your HP PC, it can be frustrating and concerning. A black screen can prevent you from accessing your files, applications, or even your operating system. Thankfully, there are several troubleshooting steps you can take to fix this problem.

Firstly, ensure that your power cable is connected to a reliable power source. If your PC is not receiving adequate power, it may not turn on properly, resulting in a black screen. Additionally, check that the power button is pressed correctly, as this may also be a cause of no power.

Secondly, try to disconnect all peripheral devices, such as external hard drives, USB drives, or printers, and unplug the PC for a few minutes. Then, plug your PC back in and start it up with only the essential external devices connected. This step eliminates any potential hardware conflicts that may cause a black screen.

Thirdly, check that your display or monitor is correctly connected. You can try attaching the monitor to another device to verify it is working appropriately. Additionally, check that the cables are correctly connected and not loose.

Fourthly, try restarting your PC by either pressing the power button or performing a force shutdown if it does not respond initially. After a few seconds, turn on the PC again and see if this fixes the black screen issue. Alternatively, you can try starting your PC in safe mode, which only loads essential system files, drivers, and services. This step isolates any software conflicts that may cause the black screen issue.

Fifthly, if none of the above steps work, you may need to update your graphic card driver or reinstall your operating system. Outdated graphic card drivers may cause incompatibility issues with the display, resulting in a black screen. Similarly, if your operating system has corrupted files or software conflicts, it may not start correctly, leading to a black screen.

In conclusion, a black screen issue on your HP PC can be a frustrating problem. However, by following these troubleshooting steps, you can fix most of the common causes of a black screen. If the black screen issue persists, it is essential to seek professional help to diagnose and fix any underlying problems that may require specialized knowledge and tools.

HP PCs are widely used for both professional and personal purposes. Whether you're a gamer, video editor, or a graphic designer, having a good graphics card is crucial for top-notch performance. If you're looking for the best graphics cards for HP PCs, you're in the right place. In this article, we'll take a look at some of the most reliable and powerful graphics cards for your HP system.

1. NVIDIA GeForce RTX 3080: The NVIDIA GeForce RTX 3080 is one of the most powerful graphics cards available in the market. It is perfect for gamers who want to enjoy high-end games at 4K resolution. This graphics card features the latest Ampere architecture which delivers exceptional performance and graphics quality.

2. AMD Radeon RX 5700 XT: The AMD Radeon RX 5700 XT is an excellent graphics card that delivers outstanding performance. With this card, you can enjoy 1440p gaming at high frame rates. This graphics card is also compatible with VR and can handle most of the latest gaming titles.

3. NVIDIA GeForce GTX 1660 Ti: The NVIDIA GeForce GTX 1660 Ti is a budget-friendly graphics card that delivers great performance. It is perfect for gamers who want to enjoy 1080p gaming without breaking the bank. This graphics card is also highly efficient, making it a better choice for smaller HP systems.

4. AMD Radeon RX 5500 XT: The AMD Radeon RX 5500 XT is another great budget-friendly graphics card. This card is perfect for gamers who want a decent gaming experience with good graphics quality at 1080p resolution. This card is also energy-efficient, making it a good fit for HP systems that require low power consumption.

5. NVIDIA GeForce GTX 1650 Super: The NVIDIA GeForce GTX 1650 Super is another good choice for gamers who want to enjoy 1080p gaming. This card is highly affordable yet delivers excellent performance. It is also energy-efficient, making it a perfect fit for HP systems that require low power consumption.

In conclusion, the best graphics cards for HP PCs range from high-end to budget-friendly options. The NVIDIA GeForce RTX 3080 and the AMD Radeon RX 5700 XT are excellent choices for high-end gaming, while the NVIDIA GeForce GTX 1660 Ti, AMD Radeon RX 5500 XT, and NVIDIA GeForce GTX 1650 Super are budget-friendly options that still provide a great gaming experience. Before finalizing your purchase, make sure to check the compatibility of the graphics card with your HP PC to avoid any compatibility issues.

If you're using an HP PC and it's slower than usual, you may encounter lag or delays while opening programs or performing basic tasks. These issues can be frustrating, but fortunately, there are several ways to speed up your slow HP PC. Here are some tips to help you improve your PC's speed and performance.

1. Uninstall Unused Programs

One of the primary reasons for a slow PC is the accumulation of unused programs. Some pre-installed programs are almost useless and hog your system resources, leading to a slower performance. Therefore, it's best to uninstall all the unnecessary software from your PC, especially programs that you haven't used in a long time. To do this, simply go to the Control Panel and select "Programs and features" to remove unwanted software.

2. Delete Temporary Files and Clean the Disk

Temporary files and junk files are created when you use your PC, and they can accumulate over time, taking up valuable disk space and slowing down your system. To fix this issue, use a disk cleanup tool to remove all the junk files that are not required. This will increase your PC's speed immediately.

3. Disable Start-Up Programs and Services

When your PC starts up, some programs and services automatically run in the background, causing a slowdown in performance. To improve your PC's speed, you should disable these start-up programs and services. To do this, launch the Task Manager (Ctrl + Shift + Esc), go to the "Startup" tab, and select the unnecessary programs and services by right-clicking on them and clicking "Disable."

4. Upgrade Your Hardware

Sometimes, upgrading your hardware can significantly improve your PC's performance. Upgrading your RAM or hard drive can make a huge difference in speed and performance. Check your PC's hardware specifications and determine which components require an upgrade.

5. Update Your Drivers and Windows

Outdated drivers and Windows Operating System can cause your HP PC to slow down. Therefore, it's essential to keep your drivers and Windows up to date. To update your drivers, go to the manufacturer's website and download the latest drivers for your PC. To update Windows, go to "Settings," "Update & Security," and then click "Check for updates."

6. Enable Performance Mode

HP PCs come with a Performance Mode option that helps them run more efficiently, especially when handling intensive applications. To enable Performance Mode, go to "Control Panel," select "Power Options," and enable "High-performance mode." This will help your PC use all its available resources, thereby improving its speed.

In conclusion, if your HP PC has slowed down, there are several reasons for this, but implementing the above tips can help speed up your slow HP PC. These strategies are easy to implement, and you don't need advanced technical skills to apply them. By following these steps, you can improve your HP PC's speed and performance, making it run more efficiently, which is crucial for productivity, gaming, and everyday use.

Accessing the BIOS menu on your HP PC can be useful when you need to make changes to your computer settings, such as configuring hardware or adjusting boot order. Here are the steps you can follow to access the BIOS menu on your HP PC:

1. Start by shutting down your computer completely.
2. Press the power button to turn on your computer and immediately start pressing the F10 key on your keyboard repeatedly until the BIOS menu appears. If the F10 key doesn't work, try the Esc, F1, or F2 key instead.
3. Once the BIOS menu appears, you can use the arrow keys on your keyboard to navigate through the different options. Be careful not to make any changes to settings unless you know what you're doing, as it could cause issues with your computer.
4. If you need to make changes to the boot order, you can do so in the BIOS menu. This will allow you to specify the order in which your computer boots up from different devices, such as the hard drive, CD/DVD drive, or USB drive.
5. When you're done making changes, navigate to the "Exit" option in the BIOS menu using the arrow keys. From there, you can choose to save any changes you've made and exit the BIOS menu.
6. If you need to access the BIOS menu again in the future, simply restart your computer and repeat the process of pressing the appropriate key (F10, Esc, F1, or F2) until the BIOS menu appears.

By following these steps, you can easily access the BIOS menu on your HP PC and make any necessary changes to your computer settings. Remember to only make changes if you know what you're doing and to be cautious when adjusting important settings.

Transferring files from an old PC to a new one can be daunting, especially if you have a large amount of data. With the right tools and techniques, the process can be simplified and accomplished with ease. Below are some tips on how to transfer files from your old PC to your new HP PC.

1. Use a data transfer cable - One of the easiest ways to transfer files is by using a data transfer cable. These cables connect both computers and allow for faster data transfer. Additionally, some data transfer cables come with software that will aid in transferring your data from your old PC to your new HP PC.

2. Use an external hard drive - Another way to transfer files is by using an external hard drive. Simply save all of the files you want to transfer onto your external drive, and then connect the drive to your new HP PC. Once connected, you can then transfer the files from the external drive to your new computer.

3. Use cloud storage - Cloud storage is another great solution to transfer files from your old PC to your new HP PC. Simply upload all of your files to a cloud storage service such as Dropbox, OneDrive, or Google Drive. Once uploaded, you can then download the files onto your new PC.

4. Use a network - If both your old PC and new HP PC are connected to the same network, you can transfer files easily. Simply enable file-sharing between both computers, and then you can transfer files seamlessly.

5. Use a data migration software - If you have a large amount of data you need to transfer, using data migration software such as PCmover can help automate the process. Simply install the software on both your old and new PC, and then let the software do the rest.

6. Use an assistant - Lastly, for a hassle-free experience, you can use a technical assistant or professional to transfer all of your files. They can help you with all the necessary steps to get all of your files migrated to your new HP PC.

In conclusion, transferring files from your old PC to your new HP PC can be a simple process if you use the right methods. Whether it's using a data transfer cable, an external hard drive, cloud storage, a network, data migration software, or a technical assistant, the choice is yours. Choose the method that works best for you and get started today.